Navman G-PILOT 3100, Operation Manual

Page: 15 / 36

G-PILOT 3100 Operation Manual
NAVMAN
15
Power on
3-8 Key reference
Jog steer to port
(see section 2-6)
Jog steer to starboard
(see section 2-6)
Change course 1° to port
(see section 4-3 or 6-3)
Change course 1° to starboard
(see section 4-3 or 6-3)
Change course 10° to port every half
second (see section 4-3 or 6-3)
Change course 10° to starboard
every half second (see section 4-3
or 6-3)
Dodge to port (press ESC to return to
course (or, in Compass mode, press
ENT to keep new course))
(see section 4-4, 5-3 or 6-4)
Dodge to starboard (press ESC to re-
turn to course (or, in Compass mode
press ENT to keep new course))
(see section 4-4, 5-3 or 6-4)
Countdown, then tack or gybe to port
(press
ESC to cancel tack)
(see section 4-5 or 6-4)
Countdown, then tack or gybe to star-
board (press
ESC to cancel tack)
(see section 4-5 or 6-4)
Hold
<
Hold
>
These functions can only be
used in compass or wind mode,
not in GPS mode
Enter MAIN menu
(see section 3-7)
MENU
+
<
>
MENU
MENU
Hold
MENU
<
MENU
+
>
AUTO
+
<
AUTO
+
>
>
<
STBY (standby)
Autopilot is not
in control, steer
manually
AUTO
Hold AUTO + MENU
AUTO
AUTO
Autopilot is in
control of boat HAND STEER
Autopilot is not
in control, steer
manually
Hold AUTO
Shortcut to change steering mode
(see section 3-7).
Hold
MENU
Jog steer to starboard
(see section 2-6)
Set rudder amidships
(see section 2-6)
< + >
Keylock
To turn keylock on or off:
Hold down
AUTO + MENU .
Press
ENT .