12
FISH450 Tricolor FISHFINDER
Installation and Operation Manual
NAVMAN
Alarms
Low Fuel
Too Shallow
Too Deep
Fish Alarm
Temperature Value
Temperature Rate
Low Battery
Fuel
Tank Full
Tank Size
Set Remaining
Clear Used
Units
Num Engines
Fuel Calibrate
Flow Filter
Depth
Units
Keel offset
Temperature
Units
Temperature Cal
Speed & Log
Units
Speed Calibrate
Log Cal
Log (Trip/Total)
Zero Trip Log
Zero all logs
Display
Fish Symbol
Speed
Temperature
Display Calibrate
Red Calibrate
Blue Calibrate
Key Beep
Language
The FISH450 Tricolor is menu driven.
The
Setup
menu allows the FISH450 Tricolor to be
customised to each user’s individual preferences.
Alarms menu (see section 4-1) is used to:
Enable or disable alarms and set the trigger
value for each alarm. Pressing the
Alarm
key from anywhere will enter the
Alarm
menu, provided the beeper is not active (in
which case pressing the
Alarm
key silences
the beeper).
Fuel setup (see section 4-2) is used to:
Set the
Tank Size
, adjust the fuel remaining
value
(Remaining)
, set the fuel remaining
value equal to tank size (
Tank Full
), clear the
fuel log
(Clear Used)
, set the fuel units
(Units)
(L, USGAL, IMPGAL)
,
set the number
of engines (
Num Engines
), calibrate the fuel
transducer
(Fuel Calibration)
and adjust the
flow averaging period (
Flow Filter)
.
Depth setup (see section 4-3) is used to:
Set the depth measurement units (M, FA,
FT) and adjust
Keel Offset
.
Temperature setup (see section 4-4) is
used to:
Set the
Temperature
measurement units
(°C, °F) and calibrate the temperature.
Speed and Log setup (see section 4-5) are
used to:
Set the boat speed units (MPH KPH KTS),
calibrate the speed, reset the Trip Log and
reset all logs.
Display setup (see section 4-6) is used to:
Enable or disable the display of fish symbols
(
Fish Symb
), speed (
Speed
) and
temperature (
Temp
) on the
Fish History
,
Zoom
and
Sonar
screens. Switch between
Trip Log and Total Log displayed on the Data
screen. Calibrate the display colours (
Display
Cal
,
Red Cal
,
Blue Cal
).
Key Beep (see section 4-7) is used to:
Enable or disable a single beep which
audibly confirms that a key has been
pressed.
Language setup (see section 4-8) is used to:
Set the language to one of the following:
English, French, German, Spanish, Italian,
Dutch, Swedish or Portuguese.
4 Setup
Menu structure of Setup
Main Menu
Fish History
Zoom
Sonar
Fuel
Data
Setup
Menu operation
To display the
Setup
screen,
press the
Menu
key
one or
more times until the
Main Menu
screen appears. Press the
Cursor Up
or
Down
key to
highlight
Setup
, then press the
Cursor Right
key to select it.
Press the
Cursor Up
or
Down
key to highlight an option, then
press the
Cursor Right
key to
select it.
Exit any
Setup
menu item by
pressing the
Menu
key. This will
display the screen one step closer to the
Main Menu
.
