NAVMAN
8120/8084
Installation and Operation Manual
10
1-4 Removing and replacing the display unit
If the 8120/8084 is bracket mounted then it
can easily be removed for security.
Removing the display unit:
1 Turn the 8120/8084 off (see section 2-2)
and put the dust cover on.
2 Loosen the knobs on the mounting
bracket and lift the unit off the bracket.
3 Unplug the connectors from the
8120/8084; turn each locking collar
anticlockwise until you can pull the plug
out.
4 Store the 8120/8084 in a dry clean place.
Replacing the display unit
1 Plug the connectors into the back of the
display unit:
Match the connector’s color to the
socket color.
Insert each connector and turn the
locking collar clockwise until it is finger
tight.
Nothing will be damaged if a cable is
plugged into the wrong socket by mistake.
2 Hold the 8120/8084 in place on the
mounting bracket. Tilt it for best viewing,
then hand tighten the knobs on the
mounting bracket. Remove the dust cover.
Mounting bracket
Knob