manualshive.com logo in svg

Navman 8084, Installation And Operation Manual, Page: 111 / 116

Share
Download
Navman 8084 Installation And Operation Manual Download Page 111

NAVMAN 

8120/8084 

 Installation and Operation Manual

111

SmartCraft

 - A feature of Mercury Marine 

engines for monitoring engine performance.

TCPA

 - Time to Closest Point of Approach. 

Time until the closest point of approach for 
two vessels.

Sea clutter

 - Rough seas can cause 

interference with the radar image.

Sonar status

 - A summary of sonar settings.

TTN 

- Time to the next position the 

8120/8084 is navigating to, either a waypoint 
or the cursor.

User card 

- A plug-in card that stores 

waypoints, routes and tracks (see section 1-2).

UTC

 - Universal Time Coordinated or 

Coordinated Universal Time, which is 
a standard world time, formerly called 
Greenwich Mean Time (GMT).

VHF

 - Very High Frequency. The frequency 

range used by marine radios.

Waypoint 

- A position that you can set on the 

Instrument chart, for example a fishing spot 
or a point on a route (see section 5).

Weather

 - An estimate of the weather based 

on barometric pressure (requires NAVMAN 
7200 VHF radio).

Summary of Contents for 8084





















































































































Reviews:

No comments