Version 20.08.2020
HW: CAM(V100)/(V20)
RL4-MIB92
P
a
g
e
6
1.4.
Settings - 8 Dip switches (black)
Some settings have to be selected by the dip-switches on the
video interface. Dip position down is ON and position up is OFF.
*
The front camera will automatically be switched for 10 seconds after disengaging the
reverse gear.
*
see also chapter "Picture settings and guide lines".
After each Dip-switch-change a power-reset of the Video interface has to be performed!
See the following chapters for detailed information.
Dip
Function
ON (down)
OFF (up)
1
Front camera
enabled
*
disabled
Power supply
output
(red wire)
+12V (max. 3A) when reverse
gear is engaged incl. 10
seconds delay and +12V by
manual switching to front
camera by keypad
+12V (max. 3A) ACC
2
Video 1-input
enabled
disabled
3
Video 2-input
enabled
disabled
4
No function
set to OFF
5
Rear-view cam type
after-market
factory or none
6
Guide-lines
enabled
Auf OFF stellen
7
PDC
enabled
disabled
8
Manual
picture settings
*
enabled
disabled
