Version 10.02.2023
HW:CAM(V98)/(V50+V41)
RL3-UCON7-T
P
a
g
e
8
2.3.
Connection – picture signal cable
Remove the head unit
Disconnect the factory picture signal cable’s white coloured female HSD connector from the
rear-side of the head unit and connect it to the purple coloured HSD connector
of the enclosed picture signal cable.
Connect the waterblue coloured female HSD connector of the enclosed picture signal cable
to the head unit’s previously become free white coloured male HSD connector.
Connect the female waterblue coloured HSD+2 connector opposite the picture signal cable
to the bordeaux coloured male HSD+2 connector of the video interface.
Note: The colours of the HSD connector of head unit and factory harness may vary.
