Version 10.02.2023
HW:CAM(V98)/(V50+V41)
RL3-UCON7-T
P
a
g
e
9
2.4.
Connection – 10pin Power / CAN cable
Connect the 10pin power / CAN cable’s female 10pin connector to the 10pin connector
of the video interface.
Connect the single
grey wire
of the 10pin power / CAN cable to the vehicle’s CAN-Low.
Connect the
blue wire
of the 10pin Power / CAN Cable to the vehicle’s CAN-High.
Connect the single black wire of the 10pin Power / CAN Cable to vehicle’s negative ground.
Connect the single
yellow
wire
of the 10pin power/CAN cable to +12V ACC power supply.
Note: The CAN communication doesn’t succeed in all vehicles. If, after connecting the 10pin
Power / CAN cable, no interface LED lightens up while the ignition is turned on, refer to
chapter “Analogue power supply for the video interface”.
