Version 09.02.2023
HW: CAM(V31)/(V22)
RL2-MZD
P
a
g
e
8
2.3.
Connection - video-interface and Power / CAN
Connect the 6pin cable’s white female 6pin pin connector to the male 6pin connector
of the video interface.
Connect the 6pin cable’s yellow and red coloured wire “TO ACC” to +12V ACC
terminal 15 or S-contact terminal 86s. The power consumption is up to 300mA.
Disconnect the female 28pin connector of the factory harness at the rear-side of the
head unit and connect it to the 28pin PNP cable’s male 28pin connector.
Connect the 28pin PNP cable’s opposite female 28pin connector to the previously
become free male 28pin connector at the rear-side of the head unit.
