Version 09.02.2023
HW: CAM(V31)/(V22)
RL2-MZD
P
a
g
e
9
2.4.
Connection - picture signal cable
Connect the enclosed picture signal cable’s female waterblue coloured HSD+2
connector to the male waterblue coloured HSD+2 connector of the video interface.
Disconnect the factory picture signal cable’s female 4pin connector at the rear side of
the factory monitor and connect it to the black male 4pin connector of the enclosed
picture signal cable.
Connect the picture signal cable’s darkgrey coloured female 4pin connector to the
previously become free male 4pin connector at the rear side of the factory monitor.
