Version 24.06.2022
HW CAM(V31)/(V22)
RL2-RLK
P
a
g
e
14
2.5.2.
Audio Insertion
This interface can only insert video signals into the factory infotainment. If an AV-source is
connected, audio insertion must be done by factory audio AUX input or FM-modulator.
If no factory AUX input is available, the optional audio-AUX cable (item no. AUX-006) can be
used for a connection to the factory radio plug (coding required!).The inserted video-signal
can be activated simultaneously to each audio-mode of the factory infotainment.
If 2 AV sources shall be connected to the infotainment, additional electronic is necessary to
switch the audio signals.
2.6.
Connection
–
external keypad
Connect the
keypad’s
female 4pin connector to the male 4pin connector of the video-
interface.
Note:
Even if the switching through several video so
urces by the keypad mightn’t be
required
, the keypad’s invisible connection and
availability is strongly recommended.
