Version 11.09.2019
HW:CAM (V98) / (V20)
RL3-C3D
P
a
g
e
5
1.3.
Boxes and connectors – video interface
The video-interface converts the video signals of connected after-market sources in a factory
monitor compatible picture signal which is inserted in the factory monitor, by using separate
trigger options. Further it reads the vehicle’s digital signals out of the vehicle’s CAN-bus and
converts them for the video interface.
1.4.
Settings of the 8 Dip switches (black)
Some settings have to be selected by the dip-switches of the
video interface.
Dip position down is ON and position up is OFF.
In case of a non-optimal displayed picture with the mentioned dip settings of dip7 and dip8,
we recommend to try each other possible dip switch combination.
See the following chapters for detailed information.
After each Dip-switch-change a power-reset of the Can-box has to be performed!
See the following chapters for detailed information.
Dip
Function
ON (down)
OFF (up)
1
No function
set to OFF
2
CVBS Video 1-input
enabled
disabled
3
CVBS Video 2-input
enabled
disabled
4
No function
set to OFF
5
Rear-view cam type
after-market
factory or none
6
Guide lines
guide lines enabled
guide lines disabled
7
Monitor-specific
adjustments
6.5inch monitor: dip
7
OFF
/ dip
8 ON
8.8inch high resolution monitor: dip
7
ON /
dip
8 OFF
8.8inch lower resolution monitor: dip
7
OFF /
dip
8 OFF
8
