CAM-N-H130 (black), CAM-N-HS130 (silver)
Mini-rear-view camera for horizontal base frame
System cable extension
7,00m
Remote control
Camera with cable 1,00m
Counter nut,
adhesive pad,
mould
Produktfeatures
Mini-camera in metal housing (black/silver/white)
Cable guided screwed tube 8mm with counter nut
Horizontal base frame
Mirrored image, optionally disengageable
Sensor-type 1/4“ Sony Super HAD CCD II NTSC colour
Light sensitivity 0.01 Lux
Digital filter for noise, optionally disengageable
Angle H=130°, V=95°, D=165°
Optional guide lines, adjustable in all directions to the car
IP 68
Power supply 10V ~ 15V
Power 100mAh
Video-connection RCA male connector
Cable-length 8m
Dimensions of housing without screwed tube
WxDxH 32x30x24mm
Weight 73g
Tip for dealers:
Inform your end custom-
ers that the rear-view camera mustn‘t be
cleaned by steam cleaner!
Installation
Horizontal base frame
Note:
If the camera is powered by reverse
signal we recommend to install a relay
between power supply of reverse signal and
power supply of the camera to ensure a
stable and uninterrupted power supply and
avoid unwanted errors in the board compu-
ter.
In case the isolation of the camera is
harmed in the moisture section close to
the camera, it is mandatory to repair the
isolation. Otherwise the camera will inevi-
tably become moist inside sooner or later.
Camera not suitable for permanent operation!
Delivery content
Connection cable
• Ground
•
+12V reverse signal
Camera
Remote control
Video-signal
Remote control
By pressing the SET/ENTER
button if camera and remote
control are connected the
Setup menu will be displayed
on the screen:
Changes in the menu are
only saved after exit and dis-
connecting the remote con-
trol bevor power off!
SET/
ENTER
