Navkom Bioreader, Instruction Manual, Page: 6 / 22

50
EN
THE RELAY 2
Our fingerprint readers have two relay outputs. This means that you can use them to open one additional en-
trance (the garage door, a side door, etc.). When entering a new person in the X-manager, there is an option
to choose which door they will open (the front entrance – relay 1, the additional entrance – relay 2, or relays
1 and 2 together).
FINGERPRINT READER SECURITY LOCKDOWN
In the case of the sensor not recognizing a fingerprint 7 times in a row, your fingerprint reader performs a 30
second security lockdown. You are not able to use your device for this period but it will come back online after 30
seconds. In case of additional 7 failed attempts, your fingerprint reader performs a lockdown again, this time for
60 seconds. For every following sequence of 7 failed attempts, the lockdown period is extended for additional
30 seconds. The longest lockdown period is 5 minutes. Whenever a finger print is recognised, the countdown
towards lockdown is reset.
WHILE YOUR FINGERPRINT READER IS IN LOCKDOWN, VIOLET LED IS BLINKING
CONTINUOUSLY. YOU ARE NOT ABLE TO USE YOUR DEVICE DURING THIS PERIOD.
1. Press the “R” button on the DIN control unit and hold it for 10 seconds.
2. To access the button on the door leaf control unit, unscrew the bolt first. Press the “R” button
and hold it for 10 seconds.
After 10 seconds, when you hear a beep, you can release the button. After that, violet LED flashes 5 times and
you hear 5 beeps. This means that factory reset has been successfully performed.
FACTORY RESET
If the reader is replaced, the new unit needs to be paired with the control unit first:
1. Press and hold button “R” on the position 10 on the DIN control unit for 1 second.
2. First unscrew the security bolt over the button “R” on the door leaf control unit. Then press
the button and hold it for 1 second.
After one second, you hear a short beep, and then you can release the button. When you hear a longer beep,
it means that the new reader and control unit have been paired.
THE READER AND THE CONTROL UNIT PAIRING
THIS STEP PREVENTS UNAUTHORISED PERSONS FROM REPLACING THE EXISTING
READER WITH THEIR OWN AND THUS GAINING ACCESS.
THE READER ON WHICH THE FACTORY RESET IS PERFORMED, WILL STILL BE VISIBLE
ON THE LIST OF DEVICES IN THE X-MANAGER, BUT YOU WILL NOT BE ABLE TO
CONNECT WITH IT ANYMORE. YOU NEED TO DELETE THE READER AND ADD IT AGAIN.