Navkom ARX-manager, User Manual

Page: 6 / 20

6
ENG
manager
longer manage the device. It must be sent to the
service centre together with its interior unit where
the fingerprint database can be deleted and an
empty device will be returned to its customer.
3.3. USER ENROLMENT
Once you have successfully entered at least one
administrator, you can start adding users. Every
user has 10 places available for their fingerprints
and you can determine which of the three relays
they will trigger; you can also determine the time
during which they can have access by entering the
start time and end time in the 24-hour interval and
the days of the week. When it comes to visitors, you
can also determine a specific date by which they
have access, and on the chosen date at midnight the
device will automatically delete them.
USER ENROLMENT PROCEDURE:
Connect your mobile device to the ARX-manager. »
In the menu, select “add” and a page will open »
allowing you to select or add an administrator or
user. Select user, insert the name of the new user
and finger, and choose which relay will the finger
trigger. When you select “forward”, a page will
open for you to determine the time limits. If you
do not choose them, the user will automatically
have unlimited access; if you choose them, a new
page will appear for you to determine the days of
the week and the time during which the user has
access. You can also choose a date after which
the user will be automatically deleted from the
device, or you can also leave this option blank. By
pressing “add”, the enrolment process is started
and the user swipes their finger four times
over the sensor. Once the procedure has been
successfully completed, a green LED will flash
on the device accompanied by a 1 second buzz.
A message saying “successful” will be displayed
and the display will return to the user list.
3.4. DELETING A USER/ADMINISTRATOR
Deleting a user or administrator is simple and
follows the same procedure. You shall be careful
when selecting the desired user or administrator
because the deleted fingerprints cannot be restored.
If you make a mistake, you will have to re-enter the
fingerprints.
Connect your mobile device to the ARX-manager. »
Choose the desired name on the user list and »
select “delete” in the menu. A message will
display saying: “User will be deleted, continue?”
If you have selected the wrong user, select “back”.
If you have chosen the right one, press confirm
and the user will be deleted. A message saying
“successful” will be displayed.
3.5. SETTINGS
Time Settings:
For accurate event recording the time and date of
the device should be set correctly.
Connect your mobile device to the ARX-manager. »
In the menu, select “options”, and a list of settings »
will appear. Choose the option “time” and a page
will appear for you to set the time and date. Once
you have set the correct time, select “confirm”
and the settings will be saved. A message saying
“successful” will be displayed.
Deleting the entire database: