Navitel XR2550, User Manual

Page: 8 / 31

NAVITEL XR2550 | 7
Digital Speed & Camera Info
The
Digital speed
feature is used to display time and vehicle speed
calculated with the help of GPS signal. Modes:
• Speed – current speed is displayed constantly [
B
],
• Speed + time – current speed [
B
] and time [
C
] are displayed.
The
Camera info
feature notifies the driver about cameras and warnings
(hereinafter – Cameras) along the way. When you turn on the
Camera
info
, the current speed and time are displayed. With the approach to the
nearest camera the following information is displayed:
• current speed [
B
],
• camera type [
D
],
• dynamic progress bar indicating approach to the nearest camera [
E
],
• distance to the camera [
F
].
All information is displayed on a black screen.
In Record mode (REC),
•
REC
or
•
are displayed [
A
].
If the vehicle is still, 0 is displayed.
If there is no GPS-signal, – – – [
G
] is displayed.
Note. A weak GPS signal may be caused by bad weather conditions and
other external factors. Please consult your vehicle speedometer.
Radar detector
When a signal is detected by a radar detector, the display shows
information about the range [
I
] or type of radar (signature) and signal
strength [
i
]. In order to turn off / turn on the alert sound, you must hold
your hand in front of the device. To switch between the operating modes
of the radar detector, press the
C/H
button.
By default, the Highway operating mode is set.