Navitel T500 3G, Manual

Page: 42 / 45

NAVITEL T500 3G AUTO | 41
EN
Manual setting of all route points
To plan a route, where the starting and the destination points are determined manually, first mark a point on the map where you
plan to start and press «Cursor» [1] to proceed to the «My route» screen. Tap on the information panel at the bottom of the screen
[2]. Press «Set start» in the «Properties» screen [3]. The GPS-receiver must be switched off. The point will be marked on the map
as a starting point. Select a destination point on the map: tap on the map to mark the point, press «Cursor» [4] and then press
«Go!» in the «My route» screen [5]. The program will offer 3 alternative routes [6]. Select the appropriate and press «Go!».
Fig. 1 Fig. 2 Fig. 3
Fig. 4 Fig. 5 Fig. 6