SAFETY INFORMATION
Vehicle
•
Shift transmission to park or neutral, set parking brake,
and install wheel chocks before doing diagnostic or
service procedures.
•
Clear the area before starting the engine.
Engine
•
The engine should be operated or serviced only by
qualified individuals.
•
Provide necessary ventilation when operating engine in a
closed area.
•
Keep combustible material away from engine exhaust
system and exhaust manifolds.
•
Install all shields, guards, and access covers before
operating engine.
•
Do not run engine with unprotected air inlets or exhaust
openings.
If unavoidable for service reasons, put
protective screens over all openings before servicing
engine.
•
Shut engine off and relieve all pressure in the system
before removing panels, housing covers, and caps.
•
If an engine is not safe to operate, tag the engine and
ignition key.
Fire Prevention
•
Make sure charged fire extinguishers are in the work area.
NOTE: Check the classification of each fire extinguisher to
ensure that the following fire types can be extinguished.
1.
Type A — Wood, paper, textiles, and rubbish
2.
Type B — Flammable liquids
3.
Type C — Electrical equipment
Batteries
•
Always disconnect the main negative battery cable first.
•
Always connect the main negative battery cable last.
•
Avoid leaning over batteries.
•
Protect your eyes.
•
Do not expose batteries to flames or sparks.
•
Do not smoke in workplace.
Compressed Air
•
Use an OSHA approved blow gun rated at 207 kPa (30
psi).
•
Limit shop air pressure to 207 kPa (30 psi).
•
Wear safety glasses or goggles.
•
Wear hearing protection.
•
Use shielding to protect others in the work area.
•
Do not direct compressed air at body or clothing.
Page 4
Summary of Contents for MaxxForce 10
Page 8: ......
Page 10: ...FOREWORD Page 2...
Page 14: ...SAFETY INFORMATION Page 6...