Disable Direct Hazards (cont.)
Figure 17.
Level 1 Manual Service Disconnects (MSDs)
1.
S-box
2.
Lever release tab
3.
MSD (2 total)
4.
Red locking tab
The Level 1 MSDs (Figure 17, Item 3) are located on the S-box (Item 1) and can be accessed from the driver
side of the vehicle.
Each level 1 MSD can be removed by pulling the RED locking tab (Item 4) out, pressing the lever release tab
(Item 2), and then pulling the release handle downward approximately 45 degrees.
Removing these two MSDs physically disconnects high voltage after the S-box, isolating high voltage away from
high-voltage isolation zone 1. High voltage will still exist in high-voltage isolation zones 2 and 3.
17
4328810R1
© 2021 Navistar, Inc. All rights reserved. All marks are trademarks of their respective owners.
