2. General information
2.1 NL-82052RS = Item 62764
On the serial engine module, a USB to serial bridge is built. The u-blox chipset incorporates a USB
standard output. It must be converted from USB to serial.
PIN1 is at the level of the shield plate and PIN6 at the cut edge of the module.
To connect the cable 95909 will need, which has a plug Aces 87214-0600.
2.2 NL-82052US = Item 62763
Engine module on the USB, a USB bridge is built. The chipset includes u-blox standard USB output.
You need the special u-blox USB driver to include that item in your operating system. It is installed
under Windows Vista/7/8 with the u-center testing tool. There is also a Linux driver available.
PIN1 is at the level of the shield plate and PIN6 at the cut edge of the module.
To connect the cable 95909 will need, which has a plug Aces 87214-0600.
2.3 NL-82052ETTL = Item 62745
On the TTL engine module, the output signal directly from the chipset ublox is processed. The ublox
chipset includes default the TTL output.
PIN1 is at the level of the shield plate and PIN6 at the cut edge of the module.
To connect the cable 95909 will need, which has a plug Aces 87214-0600.
Link to the manufacture website:
http://www.acesconn.com/
3. Commissioning
The commissioning of the engine module requires technical expertise that is unsupported solutions. You
need knowledge of the matter GNSS to know what protocols you need for your application and the data
from it.
4. Type of connection
4.1. Pinout
NL-82052RS
NL-82052USB
NL-82052TTL
1
VCC
VCC
VCC
2
GND
GND
GND
3
shield
shield
shield
4
RS232 TXD
D+
3.3V TTL TX
5
RS232 RXD
D-
3.3V TTL RX
6
PPS 3.3V TTL
PPS 3.3V TTL
PPS 3.3V TTL
Pin 1
