-5-
5.2. For PDA/SmartPhone with built-in Bluetooth
1. Turn the BT-399 on.
2. Go to Bluetooth-settings and search for devices in the Bluetooth
environment.
3. Choose the GPS receiver as to be paired device.
4. Some Bluetooth-Applications or- programs require an access code for linking
the device. In case this request appears, the access code is: 0000
5. Exit the Bluetooth-Manager.
6. Launch the suitable software for mapping/navigation, and select the correct
COM Port and set the baud rate between 4800 and 115200.
1. Perform a softreset on your device if you have any errors or
configurationproblems. It can be performed before or after pairing, in order to
exclude blocked ComPorts or applications.
2. If your BT-399 interlinked correctly and your Mapping- and
Navigationssoftware does not receive any data, please perform the following
steps. Go to: Start--> Settings-->Connection-->Transfer/Data reception.
Check if there is a tick for automatic receiving. If yes, please take out the tick,
leave this window with OK and the following windows with „X“, until you get
back to the Desktop. After that run a softreset. Go to the Bluetooth-Manager,
delete the interlinked GPS mouse and set a new connection.
3. For devices based on Windows Mobile please note that an output connection
for the GPS-receiver is already placed. If this is not the case, please provide
a new output connection for BT-399 in the Bluetooth manager in the tab „
Com connections“. All free Com Ports are being offered.
4. When interlinking the device a question about a safe connection may occur.
Take out the tick for safe connection.
5.3. General note for pairing !!!
As soon as the receiver is connected to the PDA or SmartPhone, the blue LED
will light up and hence stops blinking. Once a navigation software application, or
a test software application, has access to the COM Port and data starts flowing,
the LED will be turn off after roughly one minute.
6. Functiontest with GPS Info
1. Install the GPS Info software on your device. Choose the respective version
for your system. On the CD you can find versions for Windows 98SE, Me,
