-4-
2. Operation
2.1
. Plug the Mini USB cable with the bigger connector into the charger. Connect
the charger to a wall socket.
2.2
. The Mini USB connector has to be plugged into the Mini USB female port (4)
of BT-399.
2.3
. The red LED lights. Charge the batter completely. Unplug the Mini USB cable
after the red LED turned off.
3. LED Indication
Blinking, no Bluetooth pairing
Blazing, Bluetooth pairing established, no LED indication after 1 minute
Blinking, no satellite fix
Blazing, more than three satellite fixes available
Blinking, if battery status is not enough
Blazing, when recharge the battery
4. Operating surrounding
The BT-399 can be used under all common OS Systems as Bluetooth GPS
receiver. Drivers are not required.
5. Application
5.1. For a Notebook with Bluetooth
1. Turn the BT-399 on.
2. Please refer to the Notebook’s user’s guide for instructions to activate
Bluetooth for connection to the BT-399. As these are always a little bit
different. Usually you proceed as follows:
3. Enter the Bluetooth-Manager and search for devices in the Bluetooth
surroundings.
4. As soon as the Bluetooth GPS-receiver is found, connect it to your PC /
Notebook.
5. Depending on the Bluetooth-Software you have to choose the Com-port
before pairing the device.
6. Choose the Com-Port between Com3 to Com10, since some old software
solutions often do not see a Com-Port over 10.
7. If your Bluetooth-Software chooses the Com-Port automatically, please follow
the instructions step by step to finish.
8. Make sure which Com-port was chosen, by showing the features of the
linked Bluetooth device.
9. Some Bluetooth-Applications or- programs require an access code for linking
the device. In case this request appears, the access code is: 0000
10. Exit the Bluetooth-Manager.
11. Launch the suitable software for mapping/navigation, and select the correct
COM Port and set the baud rate between 4800 and 115200.
