Selecting Destinations
Starting navigation
April 2008
NAVIGON 2100 max/2120 max User’s Guide
47
Revision 1.0
NAVIGON, INC.
Starting navigation
With the map open in
Preview
mode, the destination is shown as a small flag. The
route and the estimated trip time are displayed.
With the map open in
Preview
mode:
•
Tap the
Start Navigation
button or simply start driving.
Quitting navigation
•
Tap
(
Back
) to quit navigation.
A window prompts you to confirm.
No GPS reception
When GPS signal is interrupted, the following message appears:
You can:
•
Wait until GPS reception resumes for determining position. Navigation begins
automatically once GPS reception is sufficient.
•
Tap the
Cancel
button. The
M
AIN
W
INDOW
opens. Your destination is saved in the
L
AST
D
ESTINATIONS
list.
•
Tap the
Demo
button. The route is calculated using the center of the specified loca-
tion as starting point and the specified location as the destination. The simulation
of the calculated route begins. Tap
(
Back
) to end the demonstration. (This
button does not appear when the destination was selected by tapping on the map.)
Arriving at your destination
A voice announcement tells you that you have reached your destination. If available, the
street name is also given.
Your current position (indicated by an orange triangle) is shown on the map.
