NAVC-703FHD
USER MANUAL
5
Navigating around Menu settings
- Press the MENU button from any mode (Video, Photo, Playback) to enter each MENU option
- Use the MENU button again to toggle forward to each option
- Use the LEFT and RIGHT arrows to scroll UP or DOWN through each option
- Use the OK button to select and option
- Use the LEFT and RIGHT buttons to scroll UP and DOWN through each option
- Use the OK button to make your selection
Note: Once you have changed a MENU option you will automatically be sent back to the VIDEO, PHOTO or
PLAYBACK screen. If you wish to return back to the MENU screen again (and to the same position) simply
press the MENU button again.
Note: From the Video or Playback mode you will need to press OK to stop recording or playback before you
can access MENU options.
Video Mode Setting
Menu Option
Selection Options
Option Description
Resolution
Select [ 1920x1080P
FHD, 1280x720P HD,
640 x 480 VGA
1080FHD gives highest image quality, less record time
720P give mid-range image quality, more record time
VGA 640x480 low image quality, longer record time
Audio
Select [On / Off ]
Turns the built in microphone on or off. For privacy
this can be turned off so that no audio is recorded.
Loop Recording
Select [1, 3, 5, 10
minutes or OFF]
Select the time you wish to record the videos in If
using a large capacity card (32GB) 10 minutes is
recommended
G-sensor
(Sensitivity)
Low, Middle, high
Sensitivity, OFF
Preserve recorded file upon collision. Such files will
not be overwritten.
Adjust and set impact force required to trigger this
feature. The higher the value the more sensitive the
G-Sensor will be.
LED Mode
Select [On, Off]
Turn front mounted LED lights ON or OFF
Motion detect
(Not supported on this model)
Setup
(See setup up options table below)
Firmware
Version
Display software version number
