Navig[8]r NAVBIKE-GPS, User Manual

Page: 9 / 17

USER MANUAL
NAVBIKE-GPS
9 | P a g e
OFF.
9.5 Then, repeat the above steps from 9.1 to move to and set the alarms for each of the 5
alarm settings as needed. Then press the MODE button to return back the sub-menu
ALRM screen
Note 1: When the alarm sounds it will sound for 20 seconds. Press any button to stop the alarm.
This will stop the alarm without activating any other functions.
Note 2: When any alarm is set, an alarm icon will appear on the display.
Note 3: The below section 10.0 follows from point 9.0 above.
Note: Press the ST/STP/+ button to move to the ODO settings.
ODO (Odometer)
10.0 Use the ST/STP/+ button to then move to the ODO screen.
Enter the screen by pressing VIEW/LAP. A 5 digit number will
appear with the far right digit flashing.
10.1 Use the ST/STP/+ button to advance this number (from 0 to 9)
or the LIGHT/SET/- button to subtract the number (from 0 to 9)
10.2 Press the VIEW/LAP button to move to the next field (to the
left) and repeat the process to change each number. Press the
MODE button when finished and to return to the main ODO screen.
Note 1: The below section 11.0 follows from point 10.0 above.
Note 2: Press the ST/STP/+ button to move to the AUTOLAP settings.
Setting AutoLap (Distances)
Note: Use this feature to use GPS tracking (discussed later in this user manual) to measure
predetermined (race track) distances.
11.0 Use the ST/STP/+ button to then move to the AUTOLAP screen. Enter the screen by
pressing VIEW/LAP.
11.1 Use the ST/STP/+ button to toggle between the following popular track lengths:
0.4, 1, 2, 3, 4, and 5 KM and OFF. Press VIEW/LAP to confirm your choice. Then use the
ST/STP/+ button to select whether to turn the alert ON or OFF.
11.2 Press the VIEW/LAP button to confirm your choice and to return back the main
AUTOLAP screen.