Navig[8]r NAVBIKE-GPS, User Manual

Page: 15 / 17

USER MANUAL
NAVBIKE-GPS
15 | P a g e
19.1 The watch will display CHARGE and the percentage charge level of the battery when
connected to a USB power source. There is also a scrolling line in the middle of the
screen to indicate charging has begun. 100% will appear on the screen once fully
charged.
19.2 Once software and drivers have been installed and when connected to a computer, PC
LINK will appear on screen.
Note 1: Please thoroughly dry the charging contacts and surrounding area to ensure proper
electrical contact and to prevent corrosion.
Note 2:
You cannot turn the GPS function on when the battery is too low. The watch will display
LOW BATT accordingly. You need to recharge the battery in order to use the GPS function again.
If the battery is too low and you are exercising, your data may not be saved. Please make sure
the battery has enough battery power before beginning your exercise in order not to lose your
data. When the battery level becomes too low, the watch display will automatically turn OFF so
as to not drain the battery further.
USING THE PC LINK SOFTWARE (QUICK START GUIDE)
20.0 This watch comes with PC software to provide communication between your watch and
your PC – easily and conveniently.
20.1 Please install the driver and software onto your PC using the CD provided
20.2 Run the software (usually by double clicking the icon produced on the desktop, pending
your software and installation selections)
20.3 Connect your NAVBIKE-GPS to the cradle then connect to opposite USB end to your PC
20.4 Click the download button from the main screen, to begin the download and confirm
your choice by clicking the following “DOWNLOAD DATA” window.
20.5 Once the download is completed, you will be prompted to delete the recorded files
from your watch. This option is at the user discretion.
20.6 Press the ENTER button to view the data.
20.7 The home page for the software will then appear, allowing you to access recorded files
through to user settings.
20.8 When a recorded file is selected, the software main page will appear, giving you access
to such features as Lap, Week and Monthly data, Google mapping and way points
through to Deleting and backing up files, recovering files and user settings.