Navig[8]r NAVBIKE-GPS, User Manual

Page: 13 / 17

USER MANUAL
NAVBIKE-GPS
13 | P a g e
saving. The screen view combinations are as follows:
a) CHRONO / ODO / CALORIES, b) CALORIE / AVE PACE / MAX PACE and c)
DISTANCE / CHRONO / STOP
Once paused, press and hold the ST/STP/+ to automatically
reset and save the file. (“Hold To Reset“ will be displayed
during this operation, finally by the file number the record
was saved to)
GPS HINTS AND TIPS
16.0 Acquire satellite signals; To get the correct time of day and begin using your GPS
watch, you have to acquire GPS signals. It may take a few seconds to a minute
depending on your geographical location. Go outside to an open area away from
tall buildings and trees. Orient the GPS antenna towards the sky for best
reception. The antenna is located at the 6 o’clock position. For the
first GPS sync, it is best that you stand still and do not move until completed.
16.1 Lost GPS Signal; If GPS signal is lost while in use, LOST GPS SIGNAL will appear on
screen. An audible beep will also sound.
16.2 If no GPS signal has been received in 15 minutes the screen will revert back to
the main time screen. The GPS search feature will also turn off.
16.3 While CHRONO is running or stopped, you can turn the GPS signal ON/OFF.
The CHRONO timer however will not stop running.
DATA MODE
17.0 From the main time screen, use the MODE button to toggle to DATA.
17.1 Use the ST/STP/+ button to choose between the data records for the RUN feature.
Each record has its own flashing record number. Press the VIEW/LAP button to
confirm your choice.
17.2 After entering a record press ST/STP/+ button again to scroll through the following
screen views. (Press the MODE button to exit when ready)
i) Start Time / End Time / Distance
ii) Chrono / Distance / Calorie
iii) Chrono/ Ave Speed / Max Speed
v) Lap 1 / Lap Distance / Lap time
vi) VIEW (Return back to memory screen) / DEL / DEL ALL
Note: To delete one file or all files, highlight the option and press and hold the VIEW/LAP button.