46 Configuring the Remote Controller System
4.1 Included Items
When you open the box, you will find the following
items with the remote controller. Check the box for
each of the following items before installing the
remote controller.
Remote Controller
Extension Cable
2 Tapping Screws
Wall Mounting Bracket
Multi Remote Controller
Cable (optional)
4.2 Connecting the Extension
Cable
1. Connect one end of the extension cable to the
port on the front panel of the water heater.
2. Pass the other end of the extension cable
through the hole in the bracket.
3. Connect the end of the extension cable to the
cable connected to the remote controller.
Note
You can connect up to 2 remote
controllers if necessary. (Optional)
4.3 Attaching the Wall Mounting
Bracket
1. Affix the bracket securely to the wall by
fastening 2 screws to the wall or to the 2 holes
in the wall receptacle.
On the wall
In the wall receptacle
2. Hang the remote controller on the bracket by
aligning the hooks.
4. Configuring the Remote Controller System
