Autopilot AP3003 gold Navicontrol
Instruction manual for use and installation -
rel. 1.21 / 02.08
page 26
F16 INFO DISPL
It selects the data on the info-display: SOG (speed over ground, received by
the GPS), COG (course over ground, received by the GPS) or COMP
(compass reading).
F17 RC FUNCT
Action of the remote controls (RS32, RC34, RS34 and ART35). The values
are:
[STND]: when you are in AUTO, the direction keys on the remote control make
a momentary change of course. When you release, the autopilot comes back
to the previous course.
[5] - [10] or [20] : when you are in AUTO, the direction keys on the remote
control change permanently the course for the specified amount of degrees (5,
10 or 20 degrees) each time pressed.
F18 MIN RUDDER
By setting this function the autopilot will add this value to any given rudder
command.
It is useful in all the vessels that have a tendencing of not respond to a small
deflection of the rudder around the midship position (for example, the waterjet
propulsions).
F19 MULTI-SENS
Enables (ON) or disables (OFF) the multisensor mode (fluxgate c
g GPS).
Please note that the ON value can be setted only if the gyronav sensor is
connected and enabled.
