B&G® V100 Blackbox VHF Radio System
•
NRS-1 Marine VHF Radio Processor
•
H100 Wired Handset B&G®
•
SP100 Wired Speaker
B&G® V100-B Blackbox VHF + AIS Radio System
•
NRS-2 Marine VHF Radio & AIS Class-B Processor
•
H100 Wired Handset B&G®
•
SP100 Wired Speaker
Optional components
Wireless Handset SIMRAD (HS40)
Wireless Handset B&G (H60)
Wireless Antenna Extension cable, 6 meters (CW100-6)
Handset Cable, 20 meters (CH100-20)
Handset Extension cable, 10 meters
Licensing information
•
The user is advised to check the radio operating licensing requirements of their country before using
this VHF radio. The operator is solely responsible for observing proper radio installation and usage
practices.
•
In some regions/countries, a Radio Operator’s license is required and it is the user’s responsibility to
determine whether such a license is required before operating the radio.
•
The frequencies used by this radio are reserved for Maritime use only and those frequencies must be
included on the user’s Radio Operator’s license.
•
A valid USER MMSI number must be entered into this radio before DSC functions can be used. You
must apply for an MMSI number which is usually obtained from the same authority that issues the
Radio Operator’s license. Contact the appropriate licensing authority in your country. If you’re unsure
who to contact, consult your Simrad or B&G dealers.
•
A valid ATIS ID number must be entered into this radio before ATIS functions can be used. An ATIS ID
number is issued by Ofcom when you add one or more pieces of ATIS equipment to your Ship Radio
License.
Important information
•
This VHF Blackbox radio system is designed to generate a digital maritime distress call to facilitate
search and rescue. To be e
ff
ective as a safety device, this radio must be used only within the
geographic range of a shore-based VHF marine Channel 70 distress and safety watch system. The
geographic range may vary but under normal conditions is approximately 20 nautical miles.
•
This radio can be con
fi
gured to operate in the user’s region and country of operation. The user must
select the region and country of operation during the initial setup of the radio. Refer to “Country
Settings table” on page 94 for details of supported Region and Countries.
•
The radio’s region and country setting can be changed at any time from the Reset menu. Refer to
“Reset” on page 35 for more details.
Regulatory compliance statements
European Union
Navico declare under our sole responsibility that the RS100, RS100-B, V100, and V100-B conforms with the
requirements of Directive 2014/53/EU (RED).
HS40 and H60 Wired Handset complies with CE under EMC Directive 2014/30/EU.
The relevant Declaration of conformity is available in the product’s section at the following website:
•
www.navico-commercial.com
4 |
Preface |
RS100 / RS100-B / V100 / V100-B User Manual