Navigation device (receiver)
NAVIA
GNSS - KL 3333
Operation manual 2.0
20
Management of the receiver
The operation of the receiver is carried out both by means of hardware and by means of
special commands to the receiver.
The hardware restart (reset) signal supplied to the special input / RST turns the firmware of
the receiver to its original state.
At the time of power on, this command is generated automatically
by the integrated receiver nodes. However the user may instruct the hardware restart at the right
time for him.
There is a special set of NMEA–like commands
t
o manage the program mode and
parameters of the receiver. Commands are input to the Rx pin. Description of commands is given
in the document "Set NMEA command of KL3333 and SL3333 receiver. pdf» (current version
available to developers upon request).