Navia KL3333, Operation Manual

Page: 18 / 25

Navigation device (receiver) NAVIA GNSS - KL 3333
Operation manual 2.0
18
'0': Standard mode
'1': Periodic backup mode
'2': Periodic standby mode
'4': Perpetual backup mode (continuous)
'8': AlwaysLocateTM standby mode
'9': AlwaysLocateTM backup mode
Run time
= 3,000 msec. Working time in the presence of the navigation solution (NT).
'0': Disabled
≥1000ms: Enabled
Valid values: 1000 ... 2,047,000ms
Sleep time = 12,000 ms. Sleep time in the presence of the navigation solution (NT).
'0': Disabled
≥1000ms: Enabled
Valid values: 1000 ... 2047 000ms
Second run time
= 18,000 ms. Opening hours in the absence of the navigation solution
(NT).
'0': Disabled
≥1000ms: Enabled
Valid values: 1000 ... 2047 000ms
Must be greater than Run time
Second sleep time
= 72,000 ms. Working time in the absence of the navigation solution
(NT).
'0': Disabled
≥1000ms: Enabled
Valid values: 1000 ... 2047 000ms
Must be greater than
Sleep time
If the sleep time is set greater than the 2047 s, the receiver will not be turned into a reduced
power state.
Before turning or changing settings is recommended to give a command to reset the
periodic mode of "Standard mode".
PMTK225,0
Examples:
Periodic modes
Periodic Backup Mode
PMTK225,0
PMTK223,1,25,180000,60000
PMTK225,1,3000,12000,18000,72000
Periodic Standby
Mode
PMTK225,0
PMTK223,1,25,180000,60000
PMTK225,2,3000,12000,18000,72000
AlwaysLocate Standby Mode
PMTK225,0
PMTK225,8
AlwaysLocate Backup Mode
PMTK225,0
PMTK225,9