12
EN
6. Carry
7. Charging
Hold the stem with either one hand or both hands to carry.
Note:
Please always use the original charger. If damaged, please contact the manufacturer to replace.
1. Open the rubber protector
plug of the charging port.
The scooter is fully charged when the LED on the charger changes from red
(charging) to green.
2. Plug the charger into
the charging port.
3. Close the rubber protector
plug after charging.
Charging Port
Warning!
·
Do not touch the interface when charging, be careful of electric shock.
·
Please check and make sure the power is off before charging.
·
NEVER turn on the power when charging.
·
Do not use this product when charging to avoid damages.
·
It is recommended to only charge at temperatures between 0-45 ℃ / 32-
104 ° F
·
Please keep the scooter body away from heat sources, open flames, and
flammable and/or explosive gases (pressurized and liquid states).
