-
Model
NBT with M.O.S.T. Amplifier
CIC with M.O.S.T. Amplifier
CCC with M.O.S.T. Amplifier except 2001-2006 7 series
EVO with M.O.S.T. Amplifier
WARNING: Do not connect any RCA cables to the ZEN-25 interface or additional
processors prior to properly grounding the aftermarket amplifier(s).
NTV-DOC 355
June 3, 2020
DES
The NAV-TV ZEN-25 processor seamlessly converts BMW factory amplified CCC, CIC, NBT and EVO systems to
12 channel analog RCA and single stereo Toslink output. Adding aftermarket amplifiers to the OEM CCC, CIC, NBT
& EVO systems has never been so simple. This kit integrates with the OEM M.O.S.T. ® 25 bus to retain volume
control, full fade (analog only), balance, treble, bass control & 7 band eq. Note: OEM infotainment systems MUST
have a M.O.S.T. 25 factory amplified system for the ZEN-25 to work out of the box.
Vehicles without a factory
M.O.S.T. 25 amplifier must be programmed for an OEM amplifier prior to the installation of the ZEN-25.
Programming is NOT supported by NAV-TV.
OVERVIEW
KIT CONTENTS
USB UPDATES
ZEN RCA Out
p
ut Harness
NTV-HAR315
M.O.S.T. Connector
NTV-CON002
ZEN Power Harness
NTV-HAR316
USB cable
NTV-CAB009
ZEN -25 Overview
Toslink Output
ZEN DSP12A-M25
NTV-ASY297
Power
Connector
Status LED
M.O.S.T. 25 connector
Analog RCA outputs
not used
CCC, CIC, NBT or EVO WO amp requires radio programming prior to installation
Compatibility chart
YEAR
MAKE
ANY
ANY
ANY
ANY
ANY
BMW
BMW
BMW
BMW
BMW
2