3 |
P a g e
Jeep Grand Cherokee 5” PCB Installation (cont.)
You should see the last board with cables
Locate the (2) ribbon cables as shown
Release the touch ribbon cable by lifting the silver tab away from the cable. Release the LCD
ribbon cable by lifting the black clip on top of the cable
Carefully lift the circuit board as shown
Place the NEW circuit board as shown.
* Connect the factory touch ribbon cable to the
new board. Route the factory LCD ribbon
cable through the slot of the new board, then
attach it to the socket. Secure the ribbons with
clips and ensure the full insertion of cables as
shown.
NTV-DOC219
