7 |
P a g e
Jeep Grand Cherokee 5” Center Speaker Connection (cont.)
Remove the speaker white plug
Red / Gray is SP+ and Black / Gray is SP-
Locate the GPS Audio Box 6-pin connector
Pin definition of the plug
GPS Audio Box wire definitions
Pink = GPS Audio +
Orange = GPS Audio –
Purple = Radio Audio IN +
White = Radio Audio IN –
See the diagram and instruction below for wiring modification and connections
1. Cut and extend (4) wires listed above (DO NOT CUT Yellow and Black wires). Route
through dash to the center speaker location.
2. Cut center speaker connector from wires. Leave about 1” wires from plug. You will reuse
the plug for speaker.
3. Cut center speaker Red / Gray SP+ wire and connect to GPS Audio + Purple wire.
4. Cut center speaker Black / Gray SP- wire and connect to GPS Audio - White wire.
5. Connect Red / Gray SP+ from plug to Pink GPS Audio + wire
6. Connect Black / Gray SP- from plug to Orange GPS Audio – wire
7. Re-connect the center speaker and dash trim
NTV-DOC219
