BHM
11/11/16
NTV-DOC285
Agreement
:
End user agrees to use this product in compliance with all State and Federal laws. NAV-TV Corp. would not be held liable for
misuse of its product. If you do not agree, please discontinue use immediately and return product to place of purchase. This product is
intended for off-road use and passenger entertainment only.
8 |
P a g e
IOB-RVC FAQ
1.
I’ve installed this interface properly, now I have a black screen in park and reverse.
a.
Make certain the IN and OUT LVDS video cables are connected in the proper
location (at the screen and proper direction), and seated fully. The ‘OUT’ cable
should go directly to the screen, and the ‘IN’ cable is really just an extension, and
should be connected from the OEM LVDS cable previously connected to the
screen.
b.
This kit connects at the
screen
for video interception.
c.
Make sure the provided ‘OUT’ connector at the screen is seated fully into the
screen (may need to wiggle it in or even shave some rubber from the plastic).
d.
Verify the LEDs on the inside of the unit are twinkling with the key on. If not,
check the fuse on the
red
power line going into the main connector of the unit.
2.
Nothing happens when I place the vehicle in reverse – it stays on the OEM screen.
a.
Be certain DIP SWITCH #4 is ON (down). This enables the RVC port on the
module.
3.
The connectors are not the same for the plug & play portion of the T-Harness, behind
the screen.
a.
Verify you have an ‘IOB’ RPO code located on the OEM RPO sticker (glove box or
spare tire well). If this vehicle has an 8” IO5 or IO6 radio, this unit is not
compatible.