BHM
11/11/16
NTV-DOC285
Agreement
:
End user agrees to use this product in compliance with all State and Federal laws. NAV-TV Corp. would not be held liable for
misuse of its product. If you do not agree, please discontinue use immediately and return product to place of purchase. This product is
intended for off-road use and passenger entertainment only.
4 |
P a g e
IOB-RVC Operation
After all connections are made and
dip switches set properly
, start the vehicle. Placing
the vehicle in reverse will show the connected rear camera, with dynamic guidelines
overlaid onto the media screen.
If adding a front camera
(requires
expansion board)
, this must be activated
in the OSD menu (see page 5). Forcing this
camera on at any time is performed by
double-tapping the
HOME
button on the
screen bezel for 3 seconds.
The module
will cycle through video modes in this
order: OEM>NAV>AV1>AV2>OEM, and
will only show inputs that are active.
If the user wishes for the front camera to
be set on a
timer
(front camera shows after leaving reverse gear, for preset amount of
time), activate this feature in the OSD menu (see page 5).
Holding the
HOME
button for ~5 seconds
while in reverse
will cycle through the
available PIP (picture in picture) options.