BHM
10/04/18
NTV-DOC266
Agreement
:
End user agrees to use this product in compliance with all State and Federal laws. NAV-TV Corp. would not be held liable for misuse of its product.
If you do not agree, please discontinue use immediately and return product to place of purchase. This product is intended for off-road use and passenger
entertainment only.
7 |
P a g e
1.
For 2016+ RAM trucks only,
emulate the
CARGO CAM MENU
and
selection icons (shown in
reverse only
–
see pic at right)
by turning the
CARGO CAM
selection to ‘
ON
’ in the programming menu
(must choose
‘
SVS6’ for ‘SWITCH’
.
2.
Connect the added Cargo Camera signal to the
Blue RCA
among the
provided
Plug & Play T-Harness
.
NOTE: This blue RCA is ONLY
for
use in 2016+ RAMs.
For RAMs 2015 and older, connect signal
directly to the SVS-6 (see page 6).
3.
After making connections and programming
CARGO CAMERA
to
ON, the vehicle must receive a
FULL CAN-BUS
RESET
before the emulation will function.
o
Perform a CAN-BUS reset by shutting the vehicle down, closing all doors and locking the vehicle. Return
in 10 minutes and start vehicle, test for proper operation.
This page is ONLY used for 2016 RAM vehicles, when the user wants to add an aftermarket Cargo Camera
and be able to select (view) it exactly like factory (touch icons while in reverse or from Cargo Cam Menu).
For ‘13
-
‘15 RAM, see
previous page (6) instead.
