BHM
10/17/18
NTV-DOC275
Agreement
:
End user agrees to use this product in compliance with all State and Federal laws. NAV-TV Corp. would not be held liable for
misuse of its product. If you do not agree, please discontinue use immediately and return product to place of purchase. This product is
intended for off-road use and passenger entertainment only.
5 |
P a g e
8.
Connect the video feed from the camera to the RCA among the main power harness
labeled ‘CAMERA’.
9.
Connect the white plug from the
Power/CAN Harness
to the port on the AUDI-P60H
interface labeled
‘P
OWER CAN
’
.
10.
Connect the HDMI Cable
(not provided)
from the
HDMI source to the
HDMI-IN
port on the AUDI-
P60H.
a.
If using HDMI, audio is extracted from
the module via the provided
Audio
Output Cable
from the port on the
interface labeled ‘
HDMI AUDIO OUT’.
Connecting this signal to the vehicle often requires the
MMI-AUX adapter.
11.
Optional:
If adding an additional composite video input (including front camera), connect
the video signal to the RCA among the Power/CAN Harness
labeled ‘
CVBS
IN’
.
12.
Optional:
Powering (12v) the
green wire
through a toggle switch (not included) among
the power harness can be set to show either the
‘CAMERA’ RCA
or
‘CVBSIN’
RCA at will.
See OSD Menu settings (page 8 & 9) to adjust
‘REVERSE LINE’
.
13.
Start the car and test for proper functionality before replacing any dash pieces.
