BHM
09/02/15
NTV-DOC242
Agreement
:
End user agrees to use this product in compliance with all State and Federal laws. NAV-TV Corp. would not be held liable for
misuse of its product. If you do not agree, please discontinue use immediately and return product to place of purchase. This product is
intended for off-road use and passenger entertainment only.
8 |
P a g e
AUDI DYN-INT Operation
Once all connections have been properly made, placing the vehicle in reverse will
show the connected rear camera image with Dynamic Guidelines which
correspond with the steering wheel geometry.
If a front camera was added and
Automatic front-camera switching
was turned
on, whenever the vehicle leaves reverse (after showing reverse image once) the
connected front camera will display for the user-set amount of time (5, 7, 9 or 11
seconds).
If no front camera switching is wanted, use the
iNAV
button on the steering wheel
for AUX Video switching (not supported in all vehicles). Alternatively, pressing
the provided toggle switch will switch between AUX Video modes in this
order:
(OEM-RGB[NAVI]-AV1-AV2-OEM)
when connected (dip switch
dependent)
.
