![NAV TOOL SAAB 9-5 2009-2011 Installation Manual Download Page 16](http://html1.mh-extra.com/html/nav-tool/saab-9-5-2009-2011/saab-9-5-2009-2011_installation-manual_3523848016.webp)
16
SAAB 9-5 2009-2011
Installation Instructions
STEP 9
Plug the NavTool supplied AUX Activator (Part # NT-AUX-ACT) into vehicle’s 3.5mm AUX jack.
See picture below.
STEP 10
After the interface is installed and you activate the NavTool, if your screen is blinking or you see a
NavTool image for a second and it goes to a black screen, you must cut a wire on the harness.
This is a front view of the connector
NOT
wire side
Cut pin 10
AUX Input
Located Inside Center Console
NavTool supplied AUX Activator
(Part # NT-AUX-ACT)