Setting
Default Setting
Description
Transpose Up
12
Set the amount to transpose in semitones in Shimmer Mode. Choose
between
1
to
12
semitones above the input signal.
Transpose Down
12
Set the amount to transpose in semitones in De-Shimmer Mode. Choose
between
1
to
12
semitones below the input signal.
Freeze Mix Behavior
Normal
Changes the way mix reacts when Freeze is engaged.
Normal:
Freeze has no forced effect on the Mix knob.
Punch In:
Activating Freeze when Mix is full dry forces the signal full wet.
Always Wet:
Activating Freeze forces Mix to go full wet.
Quantize Freeze
On
Determines whether Freeze actives immediately on Gate input/button
press or at the next clock pulse.
On:
Freeze activates on the next clock pulse.
Off:
Freeze activates immediately.
Clear On Mode Change
Off
When enabled, buffers will be cleared when Delay and Feedback Modes
are changed to minimize clicks.
Buffer Locked Freeze
On
When enabled, all delay lines will freeze to a single locked buffer at the
clock rate.
Attenuverter 1 Target
Dispersal
Assign the Attenuverter 1 knob to any CV input.
Attenuverter 2 Target
Feedback
Assign the Attenuverter 2 knob to any CV input.
Sonar Output
Stepped Voltage
Selects the algorithm used to analyze the delays and generate the Sonar
output signal.
Stepped Voltage:
Generates an additive stepped CV sequence built by
analyzing overlapping delay lines.
Range: 0V to +5V
Master Clock:
Passes the Clock Input signal through to be used else-
where in your patch.
Variable Clock:
Generates a variable clock output based on the Resolu-
tion rate.
These are the current settings available in the Configurator. More
configurable settings will be added in future updates.
Functions: The Buttons
Configurator
17
