Calf Raise / Low Pulley Frame
Top Stack Support Frame
Cable Housing
3 Inch Backing Plate
Pec Fly Pulley Bracket
Pulley Bracket
3 1/2" Pulley
Low Row Cable
Hex Bolt 3/8" x 3 1/4"L
Hex Bolt 3/8" x 3"L
Hex Bolt 3/8" x 2"L
1/2" Flat Washer Narrow
3/8" Flat Washer
1/2" Lock Nut
3/8" Lock Nut
A.
Attach Top Stack Support Frame (8) to Top Frame using a 3 Inch Backing Plate
(11) and the hardware shown. Tighten hardware firmly.
B.
Attach Pulley Bracket (29) to Top Stack Support Frame (8) using hardware
shown. Do not tighten hardware.
C.
Attach Cable Housing (9) to Main Base using hardware shown. Tighten hardware
firmly. NOTE: If an exercise attachment such as the NS-75 is used, do not install
Cable Housing (9).
D.
Attach Pec Fly Pulley Bracket (21) to Leg Extension Assembly using hardware
shown. Tighten hardware firmly.
E.
Install Low Row Cable (55) through Calf Raise / Low Pulley Frame (7). See
Detail A. Feed the looped end of the cable through the foot plate side of the Calf
Raise / Low Pulley Frame (7). Attach two 3 1/2" Pulleys (43) using hardware
shown, making sure that the cable runs in the groove on the low side of the pulley.
Final installation of the cable will be completed on Step 9. NOTE: Make sure
that the cable is NOT wrapped around the cable stop.
TM
NS-600
7
Step #2 Materials:
step
2
#
Description
Qty.
1
1
1
1
1
1
2
1
2
8
2
1
24
1
12
7
8
9
11
21
29
43
55
61
62
65
73
74
76
77
21
7
9
29
8
11
62 3"L
62
3"L
74
77
73
76
74
77
61
3 1/4"L
62
3"L
77
74
74
62
3"L
77
74
77
55
43
43
65
65
2”L
2”L
A
74
F.
Attach Calf Raise / Low Pulley (7) to the Main Base and Rear Frame using
hardware shown. Tighten hardware firmly.
137.75" (3500mm)
