Nautilus NP-L8500, Owner'S Manual And Installation Instructions

Page: 14 / 22

Page 14
ATTACH WEIGHT HORNS:
1. Take the (6) Weight Horn weldments (3 different sizes), (12) End Caps PN:731-1374, (12) Stop
Covers PN:731-1373, (6) Plates PN:731-1456-XX, and (12) Sleeves (3 different sizes), from the
packaging.
2. Using (4) M8 Washers PN:731-0355, (2) M8 Nuts PN:731-0365, and (2) M8 Bolts PN:731-2537.
Mount the first weight horn to the back rail. NOTE: there are 3 different sizes of weight horns, the
shortest on goes in the top hole and the longest one goes in the bottom hole.
3. Repeat this process for all six weight horns. Tighten all fasteners using (2) 13mm box wrenches.
4. Slide on the Stop covers then the Horn Sleeves, NOTE: there are 3 different sizes of horns sleeves,
the shortest on goes on the top weldment and the longest one goes in the bottom weldment.
5. Insert all (12) End Caps. Take the end cap numbers from the packaging, apply the desired numbers
to the end caps, POUNDS or KILOGRAMS.
OUTSIDE INSIDE
45lbs
or
20kg
35lbs
or
15kg
25lbs
or
10kg
10lbs
or 5kg
2.5lbs
or
1.25kg
5lbs
or
2.5kg