Document NO. M-7001A-EM-English
PAGE
Page 8 of 18
Engineer Manual-Trouble Shooting
VERSION
C
2.15.
Error message『Err6』：Incline motor can not reach set position over 42 seconds
Show Err6
Reset power
OFF
ON
Does incline motor moving?
Yes
No
Incline motor jammed, to eliminate jam problem then check
the inverter shall be the new version (refer to 1.3.)
and console firmware version great than V1.05, if not,
replace or update it.
Is it move about 1~2 then stop
？
Yes
No
Press Start then set incline
to 15.
System operating normal but please check
the inverter
shall be the new version and console firmware version
great than V1.05, if not, replace or update it.
Replace incline motor and check
the inverter
shall be the new version (refer to 1.3.) and
console firmware version great than V1.05,
if not, replace or update it.
