Nautilus M-7001 A, Engineering Manual

Page: 15 / 18

Document NO. M-7001A-EM-English
PAGE Page 15 of 18
Engineer Manual-Trouble Shooting
VERSION C
4.2.Engineering mode 2: Factory settings
4.2.1.Press and hold『Stop』key then press『Fast』3 seconds to enter the engineering
mode while in idle mode.
4.2.1.1. Software version：Dot-matrix show【VER】, time window show software version,
press『Enter』to next setting.
4.2.1.2. SET LANGUAGE：Dot-matrix show【SET LANGUAGE】one time then show『ENGLISH』,
press▲ or ▼ change to『
NEDERLANDS NEDERLANDS NEDERLANDS NEDERLANDS
』or 『
FRANCAIS FRANCAIS FRANCAIS FRANCAIS
』or 『
DEUTSCH DEUTSCH DEUTSCH DEUTSCH
』or 『
ITALIANO ITALIANO ITALIANO ITALIANO
』
or 『 ESPANOL ESPANOL ESPANOL ESPANOL 』, press『ENTER』to next setting.(This function only for software
version great than 1.09(include))
4.2.1.3. SET UNIT：Dot-matrix show【SET UNIT】one time then show『 METRIC METRIC METRIC METRIC 』, press
▲ or ▼ change to【 ENGLISH
ENGLISH ENGLISH
ENGLISH 】, press『ENTER』to next setting.
4.2.1.4. FAN SETTING：Dot-matrix show【FAN SETTING】one time then show『
ON ON ON ON
』, press
▲ or ▼ change to【 OFF OFF OFF OFF 】, press『ENTER』to next setting.
4.2.1.5. MIN SPEED：Dot-matrix show【SET MIN SPEED THEN PRESS ENTER】, SPEED window
show value, press▲ or ▼ to set value, press『ENTER』to next setting.
4.2.1.6. MAX ELEVATION：Dot-matrix show【SET MAX ELEVATION THEN PRESS ENTER】,
INCLINE window show value, press▲ or ▼ to set value, press『ENTER』to next
setting.
4.2.1.7. Total used distance：Dot-matrix show【ODO】, DISTANCE ＆ TIME window show
total used distance. Total used distance= TIME window value + (DISTANCE window
value X 10000) , press『Reset/Clear』+『Enter』5 seconds can erase total used
distance value, press『ENTER』to next setting.
4.2.1.8. Total used hours：Dot-matrix show【HRS】, TIME window show total hours
value, press『Reset/Clear』+『Enter』5 seconds can erase total used hours value,
press『Enter』back to idle mode.