Nautilus Hydro-Force MX3-200H, Operating Manual

Page: 4 / 55

4
Technical Specifications
MX3-200H High Pressure Extractor
Height: 42-1/4”
Length: 34-3/8”
Width: 23-3/8”
Weight: 123 lbs.
Solution Tank Capacity: 12 gallon
Recovery Tank Capacity:
Solution Pump:
Pump-Tec #114 pump with 1.4ampMotor - 0-200 psi – 0.89 gpm
Vacuum Motors:
Two AMETEK Lamb 5.7” diameter 3-Stage – tangential discharge
Can be operated in series or parallel configuration
Heater:
2000 Watt – Dual Element
(Optional)Pump-out Pump: FloJet 120VAC 4.5 gpm
Power Draw:
Cord #1 – 10.35 wide open / 7.65 full load (No Heat)
Cord #2 – 12.03 wide open / 8.84 full load (No Heat)
Cord #1 – 17.00 wide open / 14.45 full load (With Heat)
Cord #2 – 17.48 wide open / 14.25 full load (With Heat)
(Add 1.50amps to Cord #2 for units with optional Pump-Out Pump)
Standard Equipment
Vacuum Connection:
2” Barb or 2”Male Flash Cuff with 2” Male NPT
Vacuum Hose: 25’ X 1-1/2” with 1-1/2” cuff & 2” cuff
2” Female Flash Cuff x 1-1/2” hose adapter
Carpet Wand: 1-1/2” SS Dual Jet S-Bend Wand
– AW29
Accessory Mounting Hardware: Four 1/4-20 x 5/8” SS Screws and Washers
Pump Priming Hose:
12” x 1/4” with 1/4” male quick connect
HP Solution Hose: 25’ x 1/4” with 1/4” male & female quick connects
Power Cords: 2 – 25’ x 12gauge with male & female plug ends
Electrical: 2000W Heater
Dual Circuit Indicator
5amp Pump Circuit Breaker
Internal Component Cooling Fan
Optional Features:
Auto Fill System with chemical draw:
Metering Tip Kit:
14 different tips for changing chemical dilution rate
Water Supply Hose: 50’ x 3/8” with 1/4” female quick connect &
Female garden hose fitting
Auto Pump-out System:
Pump-out Hose:
50’ x 3/4” with male & female garden hose fittings