background image

28

Achievement Display

The Achievement Display activates when a workout goal is reached or a workout milestone is surpassed from past 

workouts. The Console display will congratulate and inform the User of their achievement, along with a celebratory sound. 

Lower Display Data

The Lower Display shows the Workout Values and can be customized for each User (Consult the “Edit User Profile” 

section of this manual).

Speed

The Speed display field shows the machine speed in miles per hour (mph) or kilometers per hour (km/h).

Time 

The TIME display field shows the total time count of the workout, the average Time for the User Profile, or the total opera-

tional time of the machine.

 Note: 

If a Quick Start workout is performed for more than 99 minutes and 59 seconds (99:59), the units for Time will shift 

to hours and minutes ( 1 hour, 40 minutes ).

Distance 

The Distance display shows the distance count (miles or km) in the workout. 
 

Note:

   To change the measurement units to English Imperial or metric, refer to the “Console Setup Mode” section in this 

manual.

Level 

The LEVEL display shows the current resistance level in the workout.

RPM 

The RPM display field shows the pedal revolutions per minute (RPM).

Heart Rate (Pulse)

The Heart Rate display shows the beats per minute (BPM) from the heart rate monitor. When a heart rate signal is re-

ceived by the Console, the icon will flash.

Consult a physician before you start an exercise program. Stop exercising if you feel pain or tightness in 

your chest, become short of breath, or feel faint. Contact your doctor before you use the machine again. 

The heart rate displayed is an approximation and should be used for reference only.

Watts

The WATTS display field shows the estimated power output at the current RPM and intensity Level, displayed in watts 

(746 watts = 1 hp).

Calories

The Calories display field shows the estimated calories that you have burned during the exercise.

Summary of Contents for E628





















































Reviews: