Nautilus E614 Service Manual Download | Manualshive

Page: 5 / 62

background image

5

Moving the Machine

The machine may be moved by one or more persons depending on their physical abilities and capacities. Make sure that you

and others are all physically fit and able to move the machine safely. Use proper safety precautions and lifting techniques.

1.   Remove the power cord.
2.   Use the Transport Handle to carefully lift the machine onto the transport rollers.
3.   Push the machine into position.
4.   Carefully lower the machine into position.

NOTICE:

Be careful when you move the elliptical. Abrupt motions can affect

the computer operation.

Leveling the Machine

The machine needs to be leveled if your workout area is uneven or if the Rail Assembly is slightly off the floor. To adjust:

1.   Place the machine in your workout area.
2.   Safely stand on the back of the Rail Assembly for approximately 20 seconds.
3.   Step off the machine.
4.   Loosen the locking nuts and adjust the levelers until they all contact the floor.

Do not adjust the levelers to such a height that they detach or unscrew from the machine. Injury to you or
damage to the machine can occur.

5. Adjust until the machine is level. Tighten the

locking nuts.

Make sure the machine is level and stable before you
exercise.

«
...
3
4
5
6
7
...
»

Summary of Contents for E614































































Reviews:

No comments

Related manuals for E614

Brand: Abilica Pages: 50

Brand: ProForm Pages: 28

Resolute RSL 606

Brand: Precor Pages: 12

Resolute RSL 414

Brand: Precor Pages: 15

Brand: Action Fitness Pages: 15

Brand: Action Fitness Pages: 19

Brand: PowerPeak Pages: 92

Brand: DKN technology Pages: 48

Brand: Xterra Pages: 28

Brand: AbCoaster Pages: 17

Brand: Dyaco Canada Pages: 32

Brand: BH FITNESS Pages: 27

Brand: BH FITNESS Pages: 46

Brand: BH FITNESS Pages: 49

Brand: BH FITNESS Pages: 57

Brand: BH FITNESS Pages: 54

Brand: BH FITNESS Pages: 54

Brand: BodyBreak Pages: 22

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands