Nautilus E614 Service Manual Download

Page: 25 / 62

Replace the Pedals and Legs on the Nautilus

E614/E616 (Model Year 2014) Elliptical Fitness Machines

Skill Level: II

8008203.030115.A

Replacement Procedure

Nautilus, Inc., (800) NAUTILUS / (800) 628-8458, www.NautilusInc.com - Customer Service: North America (800) 605-3369, [email protected] | outside U.S. [email protected] | © 2014 Nautilus, Inc. | ® indicates

trademarks registered in the United States. These marks may be registered in other nations or otherwise protected by common law.

NOTICE:

This document provides instructions for the replacement of the Pedals and Legs on the Nautilus

E614 and E616 Elliptical fitness machines.

If you need assistance, please call Nautilus Customer Service at 1-800-605-3369.

This icon means a potentially hazardous situation which, if not avoided, could result in death or serious injury. Read and understand all Warnings

on this machine.

Important Safety Instructions - Before servicing or using this equipment, obey the following warnings:

This icon means a potentially hazardous situation which, if not avoided, could result in death or serious injury. Read and understand

all Warnings on this machine.

WA R N I N G

AT T E N T I O N

D A N G E R

IMMEDIATE ACTION REQUIRED

C A U T I O N

To reduce the risk of electrical shock or unsupervised usage of the equipment, always unplug the power cord from the wall outlet and

wait 5 minutes before cleaning, maintaining or repairing this machine. Place the power cord in a secure location.

• Read and understand the Part Replacement Procedure before working on the machine. Failure to obey the instructions and safety warnings

could cause injury to the service technician or bystanders.

• Keep bystanders and children away from the product being serviced at all times.

• Make sure that the repair is done in an appropriate work space away from foot traffic and exposure to bystanders.

• Some components of the equipment can be heavy or awkward. Enlist the service of a second person when you do maintenance steps

involving these components. Do not try to do heavy or awkward steps on your own.

• If replacement parts are necessary, use only genuine Nautilus replacement parts and hardware. Failure to use genuine replacement parts

can cause a risk to users, keep the machine from operating correctly and void the warranty.

• Be sure that all warning stickers and instructional placards applied to the product stay present and in good condition when doing

maintenance or replacing components. If necessary request replacement warning stickers or placards from Nautilus customer service.

• Do not try to change the design or functionality of the machine being serviced as this can adversely affect user safety.

• Do not use the machine until all shrouds, instructions, warning labels and correct functionality have been verified and tested for correct

performance.

• This product contains magnets. Magnetic fields can interfere with the normal use of certain medical devices at a close range. Users may

come into proximity of the magnets in the assembly, maintenance, and/or use of the product. Given the obvious importance of these devices,

such as a pacemaker, it is important that you consult with your medical provider in connection with the use of this equipment. Please consult

the “Safety Warning Labels and Serial Number” section in the Owner’s Manual to determine the location of the magnets on this product..

Tools Required (not included)

6mm

hex

key

13mm open end wrench

Small flathead screwdriver

Summary of Contents for E614































































Search results

Summary of Contents for E614

Reviews:

Related manuals for E614

Brands by name

Popular brands

Nautilus E614, Service Manual

Search results

Summary of Contents for E614

Reviews:

Related manuals for E614

Brands by name

Popular brands